honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Timing Belt|Removal and Installation|Page 1774 > < Timing Belt|Removal and Installation|Page 1772
Page 3
background image

2. Remove the power steering (P/S) pump. Do not disconnect the P/S hoses.

3. Remove the A/C compressor adjusting pulley with bracket and the belt (with A/C), then remove the alternator belt.

4. Remove the P/S bracket. 
5. Loosen the alternator adjusting bolt and pivot nut, then remove the belt.
6. Remove the cruise control actuator.

Timing Belt|Removal and Installation|Page 1774 > < Timing Belt|Removal and Installation|Page 1772