Civic L4-1590cc 1.6L SOHC (VTEC) (1992)
Evaporator Core: Service and Repair
Removal and Installation
1. Disconnect the negative terminal first then the positive cable. Remove the battery.
2. Discharge the refrigerant.
A/C Fittings
3. Remove the bolts and disconnect the receiver line and suction line from the evaporator.
CAUTION: Cap the open fittings immediately to keep moisture out of the system.
4. Remove the glove box and glove box frame.
Evaporator
5. Disconnect the connector from the A/C thermostat and, remove the wire harness clips from the evaporator.
6. Remove the four self-tapping screws, bolt and nut.
7. Disconnect the drain hose, and remove the evaporator.
8. Install in the reverse order of removal, and:
^
Make sure that there is no air leakage.
^
Charge the A/C system.