Civic L4-1590cc 1.6L SOHC (VTEC) (1992)
Air Bag(s) Arming and Disarming: Service and Repair
Airbag System Disarming
Fig. 1 Airbag Short Connector Location
1.
Disconnect both the ground and positive battery cables.
2.
All supplemental restraint system (SRS) electrical wiring harnesses are covered with yellow outer installation.
3.
Remove access panel from steering wheel, then remove short connector (RED) from panel, Fig. 1.
4.
Disconnect connector between airbag and cable reel, then install short connector (RED) on airbag.
5.
Using Torx T30 bit, remove bolts and airbag assembly.
6.
Reverse procedure to install. Torque Torx bolt to 7.2 ft. lbs.