Civic L4-1590cc 1.6L SOHC (VTEC) (1992)
Starter Relay: Testing and Inspection
Nippondenso Starters
Vehicles w/Manual Transmission
1.
Remove and disconnect starter relay.
Fig. 9 Starter Relay Terminal Locations
2.
Apply battery voltage to C and D terminals of relay as shown in Fig. 9.
3.
Check continuity between A and B terminals of relay, continuity should exist.
4.
Disconnect battery voltage, there should be no continuity between A and B terminals of relay.
5.
If relay does not operate as specified, replace relay.