Civic L4-1590cc 1.6L SOHC (VTEC) (1992)
2.
Remove the fours bolts that secure the pump cover to the pump housing, and remove the cover.
3.
Remove the old 0-ring. Coat a new 0-ring with clean power steering fluid, and install the new 0-ring onto the pump cover.
4.
Align the rollers with the holes in the pump cover, and install the cover. Torque the four mounting bolts to 20 N.m (14 lb-ft).
5.
Reinstall the power steering pump, and adjust the belt tension. Refer to section 17 of the appropriate service manual.
6.
Start the engine, turn the steering wheel from lock-to-lock, and check the power steering fluid level. Add fluid if necessary.
7.
Make sure the power steering pump does not leak.