Civic L4-1590cc 1.6L SOHC (VTEC) (1992)
Countershaft: Service and Repair
Reassembly
CAUTION:
-
Press the 3rd, 4th and 5th gears on the countershaft without lubrication.
-
When Installing the 3rd, 4th and 5th gears, support the shaft on steel blocks and install the gears using a press.
1. Install the needle bearing on the countershaft.
2. Assemble the parts as shown in image.
NOTE: Check that the finger of the friction damper is securely set in the groove of the 1st/2nd synchro hub.
3. Place the parts assembled in Step 2, then install the parts on the countershaft.