Civic L4-1668cc 1.7L SOHC MFI (2003)
Skill Level:
Repair Technician
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
REPAIR PROCEDURE A
1.
Check the side-to-side alignment of the trunk lid latch to the striker:
^
Refer to page 20-132 of the 2001-04 Civic Service Manual.
^
In ISIS, use the keyword TRUNK ADJUST, and select Trunk Lid Adjustment from the list.
2.
Make sure the gaps of the trunk lid are even on all sides.
^
If the trunk is misaligned, go to step 3.
^
If the trunk lid is properly aligned on all sides, go to REPAIR PROCEDURE B.
3.
Adjust the trunk lid hinges:
^
Refer to page 20-132 of the 2001-04 Civic Service Manual.
^
In ISIS, use the keyword TRUNK ADJUST, and select Trunk Lid Adjustment from the list.
4.
Check the trunk operation:
^
If the trunk opens and closes smoothly and is properly aligned, return the vehicle to the customer.
^
If the trunk lid is still difficult to close, go to REPAIR PROCEDURE B.
REPAIR PROCEDURE B
1.
Check the depth adjustment of the trunk lid:
^
Refer to page 20-132 of the 2001-04 Civic Service Manual.
^
In ISIS, use the keyword TRUNK ADJUST, and select Trunk Lid Adjustment from the list.
2.
Make sure the trunk lid is flush on all sides and corners.
^
If the trunk is misaligned, go to step 3.
^
If the trunk lid is properly aligned on all sides and corners, go to REPAIR PROCEDURE C.
3.
Adjust the striker depth position and the trunk lid edge cushions:
^
Refer to page 20-132 of the 2001-04 Civic Service Manual.
^
In ISIS, use the keyword TRUNK ADJUST, and select Trunk Lid Adjustment from the list.
4.
Check the trunk operation:
^
If the trunk opens and closes smoothly, return the vehicle to the customer.
^
If the trunk lid is still difficult to close, go to REPAIR PROCEDURE C.
REPAIR PROCEDURE C
1.
Use a small screwdriver to manually set and release the trunk lid latch. Check the operation of the latch:
^
If the latch is difficult to set or release, go to step 2.
^
If the latch operates properly, go to REPAIR PROCEDURE D.