honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Power Mirror Motor|Testing and Inspection|Page 8317 > < Heated Mirror Switch|Locations
Page 1
background image

Power Mirror Motor: Testing and Inspection

Power Mirror Actuator Test

1. Remove the door panel.

2. Disconnect the 8P connector (A) from the power mirror actuator (B).

3. Check actuator operation by connecting power and ground according to the table.
4. If the mirror fails to work properly, replace the mirror actuator.

Defogger Test (Canada):

5. Check for continuity between the No.3 and No.4 terminals of the 8P connector. There should be continuity. If there is no continuity, check for an

open circuit.

Power Mirror Motor|Testing and Inspection|Page 8317 > < Heated Mirror Switch|Locations