Civic L4-1668cc 1.7L SOHC MFI (2003)
![background image](/honda/civic/l4-1668cc_1.7l_sohc_mfi/Page-2485008.png)
Using a buffer and compound, remove any polishing marks made from the sandpaper.
Use a buffing sponge, and buffing wool and compounds.
Finish up with buffing:
-1. Wet sands with #2000 sandpaper and soapy water.
-2. Remove moisture using compressed air.
-3. Finish using fine compound and very fine compound. Polish with an electric polisher.
NOTE: Polish lightly.
-4. Check the finished area at an angle, and make sure there are no polishing marks.
-5. Polish with ultra fine compound and a buffing sponge.
-6. Wax the finished area.
Use of the Repair Material
Use of the Repair Material
NOTE: Follow the materials manufacturer's instructions.
The use of a special polyester putty for PP bumpers is described here:
1. Filler