Civic L4-1668cc 1.7L SOHC MFI (2003)
^
Incorrect: "If a Master Key is to be cut, put a five (5) in the blank space. Use a two (2) if a valet key is needed."
^
Correct: "If a Master Key is to be cut, put an M in the blank space. Use an S if a valet key is needed."
Page 2, legend at the bottom:
^
Incorrect: "C. If a Master key is desired, then the number five (5) should be placed in the M/S position. Place the number two (2) in the M/S column
if a Sub (Valet) key is needed."
^
Correct: "C. If a Master Key is desired, then an M should be placed in the M/S position. Place an S in the MIS column if a Sub (Valet) key is
needed."