Civic L4-1668cc 1.7L SOHC MFI (2003)
Reassembly
1. Connect the parking brake cable to the parking brake lever.
2. Apply MolyKote grease 44MA on the sliding surfaces as illustrated. Wipe off any excess. Do not get grease on the brake linings.
3. Install the parking brake lever (A) on the rear brake shoe (B), and secure it with the pivot pin (C), wave washer (D), and a new U-clip (E). Pinch
the U-clip securely to prevent it from coming off.
4. Install the self-adjuster (C) and self-adjuster spring (D) on the front brake shoe (E).
5. Assemble the brake shoes with clevis A, adjuster bolt (F), clevis B. and the upper return spring (G).
NOTE: Thread the adjuster bolt fully into clevis A.