honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Air Mix Control Motor|Page 6458 > < Air Mix Control Motor Test|Page 6455
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Air Mix Control Motor

Air Mix Control Motor Replacement

1. Remove the under-dash fuse/relay box.

2. Disconnect the 7P connector (A) from the air mix control motor (B). Remove the self-tapping screws and the air mix control motor from the heater

unit.

3. Install the motor in the reverse order of removal. Make sure the pin on the motor is properly engaged with the linkage. After installation, make

sure the motor runs smoothly.

Air Mix Control Motor|Page 6458 > < Air Mix Control Motor Test|Page 6455