Civic L4-1668cc 1.7L SOHC MFI (2003)
7. Align the cutouts (A) on the rotary-frame with the neutral positioning cutouts (B) on the transmission range switch, then put a 2.0 mm (0.08 inch)
feeler gauge blade (C) in the cutouts to hold it in the N position.
NOTE: Be sure to use a 2.0 mm (0.08 inch) blade or equivalent to hold the switch in the N position.
8. Install the transmission range switch (A) gently on the control shaft (B) with holding the N position with the 2.0 mm (0.08 inch) blade (C).
9. Tighten the bolts on the transmission range switch while you continue to hold it in the N position. Do not move the transmission range switch
when tightening the bolts. Remove the feeler gauge.