Civic L4-1668cc 1.7L SOHC MFI (2003)
Transmission Position Switch/Sensor: Testing and Inspection
Transmission Range Switch Test
1. Remove the transmission range switch harness connector (A) from the connector bracket (B), then disconnect the connector.
2. Check for continuity between terminals at the harness connector. There should be continuity between the terminals listed for each switch position.
In the P position, between terminals:
^
No. 1 and No. 3
^
No. 1 and No. 8
^
No. 3 and No. 8
In the R position, between terminals:
^
No. 1 and No. 9
In the N position and between terminals:
^
No. 1 and No. 3
^
No. 1 and No. 10
^
No. 3 and No. 10
In the D position, between terminals:
^
No. 1 and No. 2
^
No. 1 and No. 4
^
No.2 and No.4
In the D3 position, between terminals:
^
No. 1 and No. 2
^
No. 1 and No. 5
^
No.2 and No.5
In the 2 position, between terminals:
^
No. 1 and No. 6