Civic L4-1668cc 1.7L SOHC MFI (2003)
33. Place the side plate (A) on the cam ring with its "^" mark (B) facing upward, and align the roll pin set hole (C) in the side plate with the roll pin
end (D).
34. Coat the new O-ring (F) with the power steering fluid, then position it into the groove on the side plate.
35. Install the pump housing (A) over the cover assembly (B).
36. Align the bolt holes in the cover (B) with the threaded holes in the pump housing. Install the five flange bolts (C) loosely first, then torque the
flange bolts in 2 or more steps with sequence shown.