Civic L4-1668cc 1.7L SOHC MFI (2003)
12. Install the feed line clamp (A) on the gearbox. Make sure that there is no interference between the feed and return lines any other parts.
13. Wipe off any grease contamination from the ball joint tapered section and threads. Then reconnect the tie-rod end (A) to the damper steering arms.
Install the 10 mm nut (B) and tighten it.
14. Install the new cotter pin (C), and bend it as shown.
15. Reinstall the heater valve (A) in its original position, and connect the heater valve cable to the valve arm. Install the heater hoses on the hose
clamps securely.
16. Install the air cleaner (A) and resonator (B).