Civic L4-1668cc 1.7L SOHC MFI (2003)
1. Install the 80 mm set ring (A) in the transmission housing (B).
2. Install the differential assembly (A) in the torque converter housing (B) using the special tool.
3. Align the spring pin (A) on the control shaft with the transmission housing groove (B) by turning the control shaft (C).
NOTE: Be careful not to squeeze the end of the control shaft tips together when turning the shaft. If the tips are squeezed together it will cause a
faulty signal or position due to the play between the control shaft and the switch.