Civic L4-1668cc 1.7L SOHC MFI (2003)
13. Plug in the heat gun, and turn it on. Start at the middle of the splice connector, and move the gun toward the ends as the tube shrinks. Apply heat
evenly by rotating the curved heat spreader around the splice connector. Shrinking is complete when a small amount of sealant appears at each end
of the tube.
Pigtail Terminal Selection Chart
PIGTAIL TERMINAL SELECTION CHART
Select the proper size pigtail terminal by matching the replacement terminal part number and the wire size being repaired to the corresponding pigtail
terminal part number. Then use the color (size) splice connector listed. In some instances you may also have to match the wire seal style to select the
proper pigtail terminal. Pigtail terminals are available through your parts department, in quantities of 10, using normal parts ordering procedures.
Checking For Poor Fir of Terminals
CHECKING FOR POOR FIT OF TERMINALS
Loose terminal fit can cause a number of intermittent problems in electrical circuits. By using the Terminal Inspection Feeler Tool Set you can inspect
the terminal fit between the two matching connectors without removing the terminals from the connector body.
1. Find the terminal tool that best matches the male terminal in the mating connector.