Civic CVCC L4-1488cc 1.5L EW1, EW3 (1985)
Reluctor
13.
Reinstall the reluctor using the new roll pin. Be sure the gap in the roll pin faces away from the rotor shaft, and that the reluctor is installed right
side up.
14.
Reinstall the rotor and replace the O-ring on the bottom of the distributor housing.
15.
Reinstall the distributor and set the timing (refer to the underhood label for specifications).
16.
Apply the distributor label to the vacuum advance diaphragm.
Installation Instructions for Civic Cold Start/Driveability Kit 2
1.
Replace the existing spark plugs with the ones in the kit.
2.
Remove the air cleaner.
Hose Assembly (85 Civics)