honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Brake Rotor/Disc|Front|Page 5979 > < Brake Rotor/Disc|Front
Page 2
background image

6. Remove the 6 mm brake disc retaining screws.
7. Screw two 8 x 1.25 mm bolts into the disc to push it away from the hub.

NOTE:  Turn each bolt two turns at a time to prevent cocking the disc excessively.

8. Remove the brake disc from the knuckle.

Installation

1. Installation is in the reverse order of removal.

Brake Rotor/Disc|Front|Page 5979 > < Brake Rotor/Disc|Front