honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Power Steering|Page 6727 > < Power Steering|Page 6725
Page 11
background image

18. Install the boots in the rack end with the tie-rod clips.

NOTE:  Install the boot band with the rack in the straight ahead position (right and led tie-rods are equal in length).

19. Install the boot band so that the locking tabs of the band (stake points) are in the range shown below. (Tabs should face up and slightly forward.)
20. Bend both sets of locking tabs.

21. Lightly tap on the doubled-over portions to reduce their height.

CAUTION:  Stake the band locking tabs firmly.

Power Steering|Page 6727 > < Power Steering|Page 6725