honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Valve Body, A/T|Removal|Page 5300 > < Valve Body, A/T|Removal|Page 5298
Page 4
background image

NOTE: 

-

Clean all parts thoroughly in solvent or carburetor cleaner, and dry with compressed air. Blow out all passages.

-

Replace the secondary valve body kit, P/N 27700 - P4R - 305 (The secondary valve body kit includes the linear solenoid assembly) if any parts are
worn or damaged.

-

Check all valves for free movement. If any fail to slide freely, see Valve Body Repair.

-

Coat all parts with ATF during assembly.

-

The CPC valve is installed in the secondary valve body, held in place by the lock bolt.

Regulator

Valve Body, A/T|Removal|Page 5300 > < Valve Body, A/T|Removal|Page 5298