Civic DX Coupe L4-1590cc 1.6L SOHC MFI (1999)
Note these items during reassembly:
-
Clean the disassembled parts with solvent, and dry them thoroughly with compressed air. Do not wash the rubber parts with solvent.
-
GREASE: Thoroughly pack the inboard joint and both joint boots with the joint grease included in the new driveshaft set.
-
The '98 Canage model and all '99 models uses a TPE (Thermoplastic Polyester Elastomer) outboard joint boot. Use the ear clamp type boot band
in the outboard joint boot set.
Brazil-Produced Driveshafts
