honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Front Axle|Page 5436 > < Front Axle|Page 5434
Page 17
background image

11. Close the ear portion of the band with a commercially available boot band pincers.

12. Check the clearance between the closed ear portion of the band. If the clearance is not within the standard, close the ear portion of the band

further.

13. Fit the boot ends onto the driveshaft and the outboard joint
14. Fit the double loop boot bands onto the boot ends.
15. Pull up the slack in the band by hand.

Front Axle|Page 5436 > < Front Axle|Page 5434