honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Front Axle|Page 5377 > < Front Axle|Page 5375
Page 3
background image

12. Pull the inboard joint, and remove the driveshaft from the differential case as an assembly. Do not pull on the driveshaft; the inboard joint may

come apart. Use care when prying out the assembly, and pull it straight to avoid damaging the differential oil seal.

13. Pull the knuckle outward, and remove the driveshaft outboard joint from the front wheel hub using a plastic hammer.

DISASSEMBLY 

Inboard Joint Side: 
1. Carefully clamp the driveshaft in a vise with soft jaws, then remove the set ring from the inboard joint.

Front Axle|Page 5377 > < Front Axle|Page 5375