Civic DX Sedan L4-1668cc 1.7L SOHC MFI (2001)
10. Remove the shoulder anchor adjuster (A).
11. Install the belt in the reverse order of removal, and note these items:
-
Apply liquid thread lock to the anchor bolts before reinstallation.
-
Check that the retractor locking mechanism functions.
-
Assemble the washers, collar and bushing on the upper and lower anchor bolts as shown.
-
If the seat belt tensioner has been deployed, replace the front seat belt protector (F) with a new one.
-
Before installing the anchor bolts, make sure there are no twists or kinks in the front seat belt.
-
Make sure the seat belt tensioner connector is plugged in properly.
-
Reconnect the negative cable to the battery.
-
Enter the anti-theft code for the radio, then enter the customer's radio station presets.
-
Reset the clock.
-
Do the ECM idle learn procedure.
Front Seat Belt Buckle
Front Seat Belt Replacement
SRS components are located in this area. Review the SRS component locations and the precautions and procedures, in the SRS section before
performing repairs or service.