honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Air Mix Control Motor|Page 6691 > < Air Mix Control Motor
Page 1
background image

Air Door Actuator / Motor: Service and Repair
Fresh Air/Recirculation Actuator

1. Disconnect the 4P connector from the recirculation control motor, and remove the wire harness clip from it.
2. Remove the two self-tapping screws and the recirculation control motor.
3. Install in the reverse order of removal. After installation, make sure the recirculation control motor rung smoothly.

Air Mix Control Motor|Page 6691 > < Air Mix Control Motor