honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Steering Gear|Removal and Installation|Page 7408 > < Steering Gear|Removal and Installation|Page 7406
Page 3
background image

6. Remove the stop washer (A), the 12 mm flange bolts (B), O-rings (C), and bracket (D) from the steering gearbox.

7. Remove the boot guard (A) by removing the 8 mm flange bolt (C) on the rack end.
8. Remove the boot band (D) and clip (E). Pull the boot B away from the end of the steering gearbox. Remove the rack end plug (F)

9. Loosen the locknut (A), then remove the rack guide screw (B), spring (C), and rack guide (D) from the steering gearbox.

10. Remove the snap ring (A) and backup ring (B) from the cylinder of the steering gearbox.

Steering Gear|Removal and Installation|Page 7408 > < Steering Gear|Removal and Installation|Page 7406