Civic EX Sedan L4-1668cc 1.7L SOHC (VTEC) MFI (2001)
_mfi/Page-1793001.png)
Mainshaft Bearing/Bushing: Service and Repair
Mainshaft Bearing and Oil Seal Replacement
Special Tools Required
-
Adjustable bearing puller, 25-40 mm 07736-A01000B
-
Driver 07749-0010000
-
Attachment, 37 x 40 mm 07746-0010200 Attachment, 52 x 55 mm 07746-0010400
1. Remove the differential assembly.
2. Remove the ball bearing (A) from the clutch housing (B) using the special tool.
3. Remove the oil seal (A) from the clutch side.
4. Drive the new oil seal in from the transmission side using the special tools.
