Civic GX Sedan L4-1.6L CNG (1998)
Torque Converter Clutch Solenoid: Service and Repair
NOTE: Lock-up control solenoid valves A and B must be removed/replaced as an assembly.
1. Remove the mounting bolts and lock-up control solenoid valve A/B assembly.
2. Clean the mounting surface and fluid passages of the lock-up control solenoid valve assembly, and install a new lock-up control solenoid valve
A/B with a new filter/gasket.
3. Check the connector for rust, dirt or oil, and reconnect it securely.