Civic Hatchback L4-1.5L SOHC (16 valve) (1995)
/Page-75001.png)
Starter Relay: Testing and Inspection
Nippondenso Starters
1. Remove and disconnect starter relay.
Fig. 13 Starter Motor Terminal Locations
2. Apply battery voltage to C and D terminals of relay, Fig. 13.
3. Check continuity between A and B terminals of relay. Continuity should exist.
4. Disconnect battery voltage. There should be no continuity between A and B terminals of relay.
5. If relay does not operate as specified, replace relay.
