Civic Hatchback L4-1.5L SOHC (16 valve) (1995)
/Page-949001.png)
Mainshaft: Testing and Inspection
Clearance Inspection
NOTE: If replacement is required, always replace the synchro sleeve set.
1. Measure the clearance between 2nd and 3rd gears.
2. If the clearance exceeds the service limit, measure the thickness of 3rd gear.
If the thickness of 3rd gear is less than the service limit, replace 3rd gear with a new one.
If the thickness of 3rd gear is within the service limit, replace the 3rd/4th synchro hub with a new one.
3. Measure the clearance between 4th gear and the spacer collar.
