Civic Hatchback L4-1.5L SOHC (VTEC) (1995)
Malfunction Indicator Lamp: Testing and Inspection
When the Malfunction Indicator Lamp (MIL) has been reported on, do the following:
1. Connect the Service Check Connector terminals with a jumper wire as shown. (The 2P Service Check Connector is located under the dash on
the passenger side of the car.) Turn the ignition switch on.
2. Note the Diagnostic Trouble Code (DTC): The MIL indicates a code by the length and number of blinks. The MIL can indicate simultaneous
component problems by blinking separate codes, one after another. Codes I through 9 are indicated by individual short blinks. Codes 10
through 48 are indicated by a series of long and short blinks. The number of long blinks equals the first digit, the number of