Civic Hatchback L4-1.5L SOHC (VTEC) (1995)
7. Connect the fluid lines to the valve body unit.
8. Reconnect the tie-rod ends to the steering knuckles, tighten the castle nut to the specified torque, and install new cotter pins.
CAUTION: Torque the castle nut to the lower torque specification, then tighten it only far enough to align the slot with the pin hole. Do not align the
nut by loosening.
9. Install the three way catalytic converter with the new gaskets and new self-locking nuts.
10. Connect the shift linkage.