Civic Hatchback L4-1.6L SOHC (16 Valve) (1996)
3M Super Automotive Attachment Tape
Tools:
-
Protective tape
-
Knife or Cutter
-
Sponge or Shop towel
-
Infrared dryer
-
Film
-
Putty knife
-
Alcohol
CAUTION: Put on gloves to protect your hands.
1. Remove the door panel, and pull back the plastic cover.
2. Apply protective tape on and around the molding.
3. Release the clips from inside of the door. Carefully cut the adhesive tape with a knife or cutter while pulling the edge of the molding away from the
door as shown.
NOTE: Take care not to scratch or bend the molding.
Door molding installation: