Civic Hatchback L4-1.6L SOHC (16 Valve) (1996)
3. Remove the caliper bolt, and pivot the caliper up out of the way.
NOTE: Check the hoses and pin boots for damage and deterioration.
4. Remove the pad shim, pad retainers, and pads.
NOTE: When the caliper is equipped with an outer pad shim, replace the shim together with the pads as a set.
5. Using vernier calipers, measure the thickness of each brake pad lining. The measurement does not include the pad backing plate thickness.
Brake Pad Thickness:
Standard: 9.5 - 10.5 mm (0.37 - 0.41 inch)
Service Limit: 1.6 mm (0.06 inch)
6. If the brake pad thickness is less than the service limit, replace the front pads as a set.
7. Clean the caliper thoroughly; remove any rust, and check for grooves and cracks.