Civic Hatchback L4-1.6L SOHC (16 Valve) (1996)
4.
Remove the intake manifold bracket.
5.
Disconnect the engine wire harness from the intake manifold bracket.
6.
Tape any damaged wires in the harness going to C115 (see REQUIRED MATERIALS).
7.
Install the corrugated tubing over the harness. Tape the tubing to the harness to hold it in position.
8.
Reinstall the engine wire harness to the intake manifold bracket. Reinstall the bracket to the engine. Torque the bolts to 24 N.m (17 lb-ft).
9.
Lower the car.
10.
Reconnect the negative battery cable.
11.
Enter the customer's radio station presets. Set the clock.
Disclaimer