honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Compressor (Nippondenso)|Page 7169 > < Heater Core Case|Removal and Installation|Page 7164
Page 1
background image

High Pressure Safety Valve HVAC: Service and Repair
Compressor (Nippondenso)

1. Recover the refrigerant with a recovery/recycling/charging station.

2. Remove the relief valve and the O-ring. Plug the opening to keep foreign matter from entering the system and the compressor oil from running out.
3. Clean the mating surfaces.
4. Replace the O-ring with a new one at the relief valve, and apply a thin coat of refrigerant oil before installing it.
5. Remove the plug, and install and tighten the relief valve.
6. Charge the system and test its performance.

Compressor (Nippondenso)|Page 7169 > < Heater Core Case|Removal and Installation|Page 7164