Civic Hatchback L4-1.6L SOHC (16 Valve) (1996)
Park Pin Switch: Testing and Inspection
1. Remove the front console.
2. Disconnect the 4P connector from the park pin switch.
3. Check for continuity between the No.3 and No.4 terminals with:
-
the shift lever any position other than [P], or
-
the push button pushed in [P].
There should be continuity.
4. Check for continuity between the No.3 and No.4 terminals with the shift lever in [P] and the push button released. There should be no continuity.
If necessary, replace the park pin switch.
NOTE: Park pin switch 4P connector No.1 and No.2 terminals are for A/T gear position console light.