Civic Hatchback L4-1.6L SOHC (16 Valve) (1996)
Air Bag(s) Arming and Disarming: Service and Repair
To prevent accidental airbag deployment, turn the ignition switch OFF, disconnect the negative battery cable, and wait three minutes before
disconnecting any SRS connectors.
-
Before disconnecting the SRS main harness (A) from the SRS unit, disconnect both airbags (C,D).
-
Before disconnecting the cable reel 2P connector (B), disconnect the driver's airbag 2P connector (C).
1. Disconnect the negative battery cable, and wait at least three minutes.
2. Disconnect the airbag connector(s).
Driver's 2p Connector
Driver's Side:
Remove the access panel from the steering wheel, then disconnect the driver's airbag 2P connector and cable reel 2P connector.
Passenger's 2p Connector
Front Passenger's Side:
Remove the glove box, then disconnect the front passenger's airbag 2P connector and SRS main harness 2P connector.