Civic Hatchback L4-1.6L SOHC (16 Valve) (1996)
CORRECTIVE ACTION
Adjust the shift cable.
1.
Move the shift lever to Neutral.
2.
Remove the lock pin from the shift cable adjuster.
3.
Check the alignment of the hole in the adjuster with the hole in the shift cable. They should align perfectly.
4.
Loosen the locknut on the adjuster. Turn the adjuster in or out until the holes align perfectly. Tighten the locknut to 7 N.m (5 lb-ft).
5.
Reinstall the lock pin. If the lock pin binds as you install it, the shift cable is still out of adjustment.
6.
Move the shift lever to all the gear positions. Verify that the shift lever position indicator shows each position.
7.
Move the shift lever to Park. Verify that the key can be removed.
8.
Insert the key in the shift lock release slot, and verify that the shift lever releases.
9.
Reinstall the center console.
WARRANTY CLAIM INFORMATION
In warranty:
The normal warranty applies.
Operation number:
214305
Flat rate time:
0.5 hour
Failed part:
P/N 54315-S04-A81
H/C 4778643
Defect code:
074
Contention code:
B99
Template ID:
97-009A
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Service Manager or your Zone Office. You
must request consideration, and get a decision, before starting work.