honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Engine Controls - MIL ON/DTC P0420/Engine Ping|Page 5117 > < Engine Controls - MIL ON/DTC P0420/Engine Ping|Page 5115
Page 2
background image

6. Remove the control lever from the control shaft, then remove the shift cable. Take care not to bend the cable when removing/installing it.
7. Install the shift cable in the reverse order of removal.
8. Check the cable adjustment on reassembly.

ADJUSTMENT 

WARNING:  Make sure lifts are placed properly. 

1. Remove the front console.

2. Shift to [N] position, then remove the lock pin from the adjuster.

Engine Controls - MIL ON/DTC P0420/Engine Ping|Page 5117 > < Engine Controls - MIL ON/DTC P0420/Engine Ping|Page 5115