Civic Hatchback L4-1.6L SOHC (16 Valve) (1996)
-
Apply protective tape along the edge of the entire quarter glass opening flange.
3. Carefully remove the quarter glass.
NOTE: Check the molding for damage, and replace it if necessary.
Installation
1. Using a knife, scrape the old adhesive smooth to a thickness of about 2 mm (0.08 in.) on the bonding surface around the entire quarter glass
opening flange.
NOTE:
-
Do not scrape down to the painted surface of the body; damaged paint will interfere with proper bonding.
-
Remove the fastener from the body.
-
If any of the clips are broken, remove them from the body.
-
Mask off surrounding surfaces before applying primer.
2. Clean the body bonding surface with a sponge dampened in alcohol.
NOTE: After cleaning, keep oil, grease and water from getting on the surface.
3. If the quarter glass is to be reinstalled, use a putty knife to scrape off all traces of old adhesive, then clean the quarter glass surface with alcohol
where adhesive is to be applied.
NOTE: Make sure the bonding surface is kept free of water, oil and grease.
CAUTION: Avoid setting the quarter glass on its edges; small chips may later develop into cracks.
NOTE: Clean the shadowed area.