Civic Hatchback L4-1493cc 1.5L SOHC (D15B2) TBI (1988)
6. Disconnect the field coil connector and remove the screws (3) and field coil.
7. Install in the reverse order of removal and:
-
Install the field coil with the wire side facing up (see above).
-
Clean the pulley and compressor sliding surfaces with non-petroleum solvent.
-
Check the pulley bearings for excessive play.
-
Make sure the circlip is fitted to the groove properly.
-
Apply locking agent to the thread of the center bolt and tighten it securely.
-
Make sure that the pulley turns smoothly.