honda Workshop Repair Guides

Honda Workshop Service and Repair Manuals

Seals and Gaskets, CVT|Service and Repair|Page 4750 > < Seals and Gaskets, CVT|Service and Repair
Page 2
background image

1. Install a 2.50 mm (0.098 inch) 80 mm set ring in the flywheel housing.

NOTE:  Do not install the oil seal yet.

2. Install the differential assembly into the transmission housing using the special tool as shown.

Seals and Gaskets, CVT|Service and Repair|Page 4750 > < Seals and Gaskets, CVT|Service and Repair