Civic HX Coupe L4-1668cc 1.7L SOHC (VTEC-E) MFI (2001)
5. Measure clearance between 80 mm shim and bearing outer race in transmission housing with a feeler gauge.
Standard: 0-0.10 mm (0-0.004 in.)
6. If the clearance is more than the standard, select a new 80 mm shim from the following table. If the clearance measured in step 5 is within the
standard, go to step 9.
7. Remove the bolts and transmission housing.
8. Replace the thrust shim selected in step 6, then recheck the clearance.
9. Reinstall the transmission.