Civic LX Sedan L4-1590cc 1.6L SOHC MFI (1998)
2.
Remove and discard the three self-locking nuts securing exhaust pipe A to the exhaust manifold.
3.
Remove and retain the two nuts securing exhaust pipe A to the mounting bracket then lower the pipe from the exhaust manifold.
4.
Remove the heat shields from exhaust pipe A.
5.
Install the new heat shields using the four nuts from the kit, and torque the nuts to 9.8 N.m (7.2 lb-ft).
6.
Reinstall exhaust pipe A to the exhaust manifold using three new self-locking nuts and a new gasket. Torque the nuts to 33 N.m (25 lb-ft).
7.
Reinstall the two nuts onto the mounting bracket.
