Civic LX Sedan L4-1590cc 1.6L SOHC MFI (1998)
Defect Code:
07406
Symptom Code:
03602
Skill Level:
Repair Technician
Diagnostic Trouble
Code:
To create the 15-digit DTC, see
the applicable repair procedure.
Out of warranty:
Any repair performed after warranty expiration may be eligible for goodwill consideration by the District Parts and Service Manager or your Zone
Office. You must request consideration, and get a decision, before starting work.
TOOL DESCRIPTIONS
The holding force gauge measures the amount of pull on the vehicle. It is a bracket that counts as one weight, plus five removable weights.
During the test-drive, attach the bracket and the weights to the steering wheel on the side opposite the pulling direction. For example, if the vehicle pulls
to the right, attach the bracket and weights to the left side of the steering wheel. Start with the maximum amount of weight on the steering wheel, and
remove the weights until the vehicle drives in a straight line.
When recording the pull on the worksheet, write down the direction of the pull (lefi or right) and the number of weights required to balance the pull (one
through six). For example, if you have the bracket and two weights on the steering wheel, then record this as three weights.
NOTE:
The bracket counts as one weight.
