Civic Sedan L4-1.5L SOHC (16 valve) (1995)
Shift Fork: Testing and Inspection
Reverse Shift Fork
1. Measure the clearance between the reverse shift fork and shift piece pin.
Standard: 0.05-0.35 mm (0.002-0.014 in)
Service Limit: 0.5 mm (0.02 in)
2. If the clearance exceeds the service limit, measure the width of the groove in the reverse shift fork.
If the width of the groove exceeds the standard, replace the reverse shift holder with a new one.
If the width of the groove is within the standard, replace the 5th/reverse shift piece with a new one.
3. Measure the clearance between the reverse idler gear and reverse shift fork.