Civic Sedan L4-1.5L SOHC (VTEC) (1995)
5. Select the proper thrust shim on the basis of the following calculations:
NOTE: Do not use more than two thrust shims.
(Basic Formula)
(B) + (C) - 0.95 = thrust shim thickness
Example of calculation:
Distance (B)(2.00 mm) + Distance (C)(0.09 mm) = 2.09 mm
subtract the spring washer height (0.95 mm) = the required thrust shim (1.14 mm)
6. Install the oil guide plate and thrust shim selected in the transmission housing.
NOTE:
-
Clean the thrust washer, spring washer and thrust shim thoroughly before installation.
-
Install the thrust washer, spring washer and thrust shim properly.